Fast drying water based vibration damping compound for Marine.

Decidamp® SP150 is a fast drying, water based viscoelastic vibration damping compound and adhesive. Previously known as Soundpaint, this advanced formula was developed for acoustic improvement of structures that are exposed to vibration and impact. It effectively absorbs and dissipates vibrational energy from the flexural stress of the base structure and reduces panel coincidence and resonance effects.

Developed with a special polymer technology, Decidamp® SP150 is a lightweight, non-toxic structural damping material that is suitable for exterior and interior use and anywhere that noise can impact structure, comfort and function. With exceptional fire properties and compliance with international fire codes it performs across marine industry, automotive and other applications.

Decidamp® SP150 is easy to apply by simply spraying, rolling or trowelling onto surfaces. Once dry, the cured film is UV, water and chip resistant and exhibits low combustibility.

Decidamp® SP150 is a superior extensional damping compound suitable to be applied directly to structures (steel, fibreglass and alloys) where sound damping is required. Available in grey as standard or other colours can be ordered. Low-density properties and its exceptional performance-to weight ratio makes it the ideal choice for weight sensitive applications.

Features

Non-sag formulation
Excellent adhesion, even to aluminium
Water based, non hazardous
Cures to chip resistant finish
Excellent flame resistance, ignition retardant
Broad temperature and frequency range
Ideal for weight sensitive applications - lightweight
Reduces resonant vibration and eliminates tinniness and ringing
Easy application and clean up (sprayable)
Can be painted/gel coated over, once cured
Tested to International marine fire standards
Water based, easy application and clean up
Minimum weight for maximum performance
Increases panel transmission loss
Extensional damping

Applications

Marine: boat hulls, ceilings, decks and bulkheads
Machinery and industrial equipment enclosures
HVAC, plant rooms, substations
Automotive, heavy earthmoving equipment
Stainless steel applications (sinks, bowls)
Hospital equipment
Whitegoods and dishwashers
Metal floors, deck roofing, wall cladding

Installation

Decidamp® SP150 can be applied using the following methods:

Trowel: Simply apply and smooth as required.

Brush: For brush applications, we recommend adding 0.3% of water by weight per kg of product. This will assist in easier and smoother application. Use a wide 100mm thick nylon bristle brush. Keep brush well loaded with Decidamp® SP150 and use short strokes, applying a thick coat of approximately 2-3mm. Avoid “painting” back and forth as this will cause the coat to become too thin.

Roller: For roller applications, we recommend adding 1% of water by weight per kg of product. This will aid in an easier and smoother application. Using a short knap cloth roller, roll with short strokes, and try to avoid rolling back and forth, as this will cause the coat to become too thin. Use a light brush to “tip-off” the stipples if desired.

Air assisted and Airless spray systems: Four main spray systems are available for the application of Decidamp® SP150.

Click here for Technical Data Sheet

Click here for Installation Guide

Currency

Pyrotek

Currency